Wireless receiver RF Rx SW868-2W-RS232

Features/Options

  • sWave® wireless technology
  • 2 potential-free relay outputs
  • 2 change-over contacts, max. 6 A
  • RS 232 interface
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Note
  • Adapter cable RJ11 on Sub-D 9-pol female 0,5m is included

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20, -4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels2
MountingDIN rail mounting
Connectionterminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Degree of protectionIP 20 to IEC/EN 60529
Inputs2 wireless channels, max. 10 transmitters per channel
Outputs2 change-over contacts (relays),
RS 232 interface
Rated operating current Ie24 VDC: max. 0.1 A;
24 VAC: max. 0.25 A
Rated operating voltage Ue24 VAC/DC -15 % … +10 %
Ie/Ue of output contacts6 A/250 VAC; 2 A/24 VDC
Utilisation categoryAC-15; DC-13
Ui250 VAC
Uimp2.5 kV
Frequency868.3 MHz
Displaygreen LED: operating state,
orange LEDs: switching conditions and baud rate setting
Operation cyclesapprox. 12000 telegrams at repetitions/h
Degree of pollution2 to IEC/EN 60664-1
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
Interface
Baudrate9600 Bd … 57600 Bd
Data bits8
Stop bit1
ParityNone
Flow controlNone
External antennaalways required for optimum wireless range
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Ordering details
Type   Material no.
RF Rx SW868-2W-RS232 24 VAC/DC 1226183
Accessories